Innovation Lab
The Innovation Lab is ACE LEDS' testing ground for building new industry solutions to the toughest challenges our customers can imagine. Here, we listen for opportunities and invent solutions. We stretch innovation further, disrupt the industry, and revolutionize the next generation of lighting opportunities.
We bring the innovation. We bring the power.

Introducing the latest evolution of The Rail™ family of Linear Emergency LED drivers – The Mini-Rail™
It’s the smallest constant power linear emergency LED driver on the market, at just 0.83” high and 1" wide. But don’t let the smaller size fool you, this isolated relay driver delivers a wide output range of 12-55 Vf, the highest power density available for its size, allowing for unlimited design applications.
HOW IT EMPOWERS YOU
Isolated Relay design provides a delay of the AC power to the normal LED driver to protect from high voltage or high current transients that can occur during transition from emergency-mode to normal mode.
Wide output voltage range from 12-55 Vf allows for unlimited design applications.
Discrete components and design allow for increased power in the smallest case size available.
Constant Power allows for over 90 minutes of steady regulated power with no drop off.
Highly efficient LiFePO4 battery with 7 to 10 years of life expectancy.
For questions or to place an order contact us at [email protected] or 800-375-6355 or your local WPG Americas Sales representative at [email protected] or 888-WPG8881
Check out product specifications for
the Mini-Rail™ Linear Emergency LED Driver.

Emergency Lighting Dimming Control Relay — Versatility and reliability when you need the power back and you need it now.
During a power failure, the Dimming Control Relay overrides the dimming function on the LED driver which forces it to Full Light Output levels.
Our Emergency Lighting Dimming Control Relay is a UL924 listed emergency lighting control device intended for use with 0-10 Vdc or DALI Dimming Controls.
HOW IT EMPOWERS YOU
Used with LED luminaires that do not use AC power switched lines.
Can be used with ALCRs that switch or control power.
Small size and light weight: Enables mounting inside small fixtures (The ACE-G.5-ELDCR has the smallest footprint and smallest of any ELCD of this type in the industry.)
Cost Effective Pricing You save 15% or more on domestic brands.
USA Backed Warranty
For questions or to place an order contact us at [email protected] or 800-375-6355 or your local WPG Americas Sales representative at [email protected] or 888-WPG8881
our Emergency Lighting Control Relay.
Emergency Lighting
Dimming Control Relay

The New 10 W Constant Power Emergency Lighting Power Supply — The Answer for Type B TLED Tubes
Our latest achievement in advanced LED technology is the 10 W Constant Power Emergency Lighting Power Supply for Type B TLED Tubes. This specially designed, innovative power supply works with a broad range of applications powering tubes from 5 - 23 watts. It features a simplified two-wire installation and is UL and cUL listed (UL924).
HOW IT EMPOWERS YOU
- Used with LED luminaires that do not use AC power switched lines.
- Lamp Compatibility The power supply has been tested and is compatible with lamps from NINE different manufacturers.
- Broad Wattage Versatility We've optimized it to power 5 - 23 W single-ended tubes.
- Cost Effective Pricing You save 15% or more on domestic brands.
- USA Backed Warranty
For questions or to place an order contact us at [email protected] or 800-375-6355 or your local WPG Americas Sales representative at [email protected] or 888-WPG8881
To find out even more about our new 10 W Constant Power Emergency Lighting Power Supply for Type B TLED Tubes check out the sell sheet or product specifications here.
The Rail™ Linear Constant Power Emergency LED Driver — Impossibly Sleek, Incredibly Narrow
- Up to 45% narrower and 19% shorter than major competitors
- UL and cUL listed (UL924) & CEC Title 20 compliant
- Built with Lithium (LiFePO4) batteries
- Constant Power output maintains consistent illumination during 90 minute duration
- Eliminates costly extra on-site wiring
- Extremely competitive pricing & no tariffs
for our Rail™ Linear Emergency LED drivers here.


Cold Start Constant Power Emergency LED Drivers — The Power You Need to Beat Back the Cold.
The “Cold Start” function allows for -20°C starting temperatures, making it the best choice for outdoor and extreme cold environments.
In very cold environments, it’s not uncommon for operating LEDs to require an initial surge of voltage to turn on. Once the lights are on, cold temperatures no longer threaten the LEDs, as they are warmed up by the current flowing through them as they operate. However, many LEDs cannot tolerate the initial surge.
ACE LEDS’ Cold Start Constant Power Emergency LED Drivers utilize Lithium (LiFePO4) batteries as well as a heating element to achieve and maintain optimal low-temperature operation. Think of them working like an electric blanket, where the heating element surrounds the battery and keeps it warm and ready to start when the power goes off.
- Avaliable in 10 Watt or 16 Watt, single piece or 2 piece modular form factors
- Environmentally safe, running on advanced lithium power
- Constant Power output maintains consistent illumination during 90 minute duration
Ideal for freezers, cobra head fixtures, outdoor fixtures, canopies and wallpacks.
Extremely competitive price points, without tariffs
- 100% protected by our 5-year USA-backed warranty

The PencilTM Programmable LED Driver - A Design Engineer's Dream.
Measuring in at just 0.75 inches wide and 0.75 inches high The Pencil™ Programmable LED Driver is truly LED innovation. It has the shortest height and narrowest form factor on the market. Designed small for architectural lighting applications, this versatile driver is programmable, with Deep-Dimming and 3X wider voltage range than the competition.
As architectural lighting trends continue to change, becoming ever more sophisticated, ACE LEDS recognized the need for a small, smart, powerful form factor. So, we developed this incredibly small but incredibly versatile driver that actually helps design engineers do their job better by allowing them to create innovation that couldn’t have existed before.
Because the size of The Pencil™ Programmable LED Driver is so short and narrow, and the voltage range is so large, Original Equipment Manufacturers (OEMs) can lower their overall inventory and save up to 15% on manufacturing costs.
Key Features of the 30 W, 25 W and 13W models include:
- 0.75 inches wide x 0.75 inches high
- Up to 3X wider voltage range on 30 W models
- The industry’s most popular dimming option: 0-10 V
- Deep Dimming technology (100% down to 0.5% to off)
- UL Class P
- Costs up to 15% less than the competition.
- Designed small for architectural lighting applications
For questions or to place an order contact us at [email protected] or 800-375-6355 or your local WPG Americas Sales representative at [email protected] or 888-WPG8881
Evaluation samples are available for immediate shipment for qualified customers. Request a sample today.
Check out product specifications
for our Pencil™ drivers here.


for our Low Power drivers here.